GBSB Swing / Circle Skirt

You know the advice that you should never buy fabric without a project in mind? I totally ignore that most of the time. There have been a few exceptions such as the navy twill for the jacket I had to make, but mostly I buy fabric because I like it. Sure, I consider the material type, the weight, the drape and what styles the print would suit, but I don’t always have a project in mind and sometimes end up using that fabric for something totally other than what I originally thought.

This fabric however, I have known exactly what do with since I bought it at March’s Spring Knitting & Stitching Show. The soft drape of the cotton, the brightly colored crazy travel novelty print….it screamed circle/swing skirt!

travel fabric

I used a pattern from my original Great British Sewing Bee book, which meant I had to download, print and piece together the pattern. Considering the way GBSB has inspired so many to take up or resume sewing, I find it disappointing that their books are so opaque on sizing. Each pattern is multi size, usually UK 8-16, but there are no guidelines on waist/bust/hip measurements for each as you would get on a paper pattern. Instead you get a diagram of the pattern pieces printed on one page of the book on a squared background, and the information that each square is 1cm. But again, no clear guidance on how to measure and judge sizing or adjustments from this.

GBSB circle skirt book

The pattern for this skirt is very simple (waistband and 2x skirt panels) and the only important measurement is really the waist. Based on the number of 1cm squares I judged that the largest size 16 was, including seam allowance and the buttonhole overlap feature, approximately 2.5 cm short of my waist measurement. This was easily added to the end of the waistband piece (/2 since it’s cut on the fold), and for the skirt it was added to the straight edge, /4 since there are two skirt pieces (front and back) cut on the fold.

GBSB circle skirt pattern adjustmentI actually cut the bottom of the skirt panel along the size 8 (shortest) line, even though I was also cutting along the size 16 (deepest) waistline. Given my short proportions though this put the finished skirt length just on the knee which is quite flattering.

Cutting was very quick, thanks in part to my new rotary cutter…more about that in another post! It definitely made cutting the long curve of the skirt less of a headache.

Sewing was also quick; sew the front and back skirts at the side seams, insert concealed side zip (I had one the right length and color!), sew waistband in half at the ends, turn and press, sew waistband to skirt, make buttonholes, hem and done!

Finishing the waistband seam was a pain. I think either the instructions are not clear enough or you need a bigger seam allowance. I sewed both raw edges of the waistband to the skirt, then I was trying to turn the raw edges under and top stitch – I had to do this on the inside rather than the outside so I had half a chance of keeping the raw edge under, there wasn’t enough spare.

What I think is supposed to happen is that you sew the front edge of the waistband to the skirt, then turn the back edge under and top stitch to enclose all seams. But the instructions didn’t describe this explicitly and I would have expected them to. Also because you have already stitched both waistband ends together, this makes lining up and accessing the front raw edge a bit tricky at the ends. The alternative is to do what I did but on a 2cm rather than 1.5 seam allowance, so that you have enough to turn under. This would make the waistband narrower but it’s quite generous as is.

Anyway, on to the most exciting bit of sewing this skirt – the buttonholes! The waistband design has an overlap of fabric across the top of the zip which fastens with two buttons. My sewing machine has an automatic buttonhole setting (in fact three styles) and came with the necessary foot. Essentially it works by you setting the button you will use into a gauge in the back of the foot. The needle is threaded in the front of the foot as normal, and you pull a stopper down from a fixed point on the machine to the left of the foot. Then you start the machine sewing (using the start/stop button rather than the foot pedal) and it sews a straight line until the stopper hits the stopper at the front of the button gauge. Then the machine sews a zig zag end, a quick line back to front until it hits the front stopper, then another line backwards to the gauge stopper, locking stitch and stops. Magic! You then use a seam ripper or snips to carefully open the buttonhole between the two lines of stitching.

buttonhole foot I did a lot of practice ones on some scrap fabric (probably more than I needed but it was fascinating me!) and then bit the bullet on the real thing. I think there must be a trick to lining up the holes perfectly parallel, I marked the start of mine but it was hard to see precisely past the machine foot so they are slightly off.

GBSB skirt buttons

Start to finish this is probably the quickest sew, considering I had to print and make up the pattern first too, everything done in less than a day.

GBSB skirt

 

A botched cami and a pattern fitting workshop

So #thewardrobechallenge didn’t go so well in June. Somehow the month ran away with me and so a couple of weeks ago I decided to try and bust some of the fabric stash and make something quick and easy for summer – the Cami top from the 1st GBSB book. Adapted slightly – just made simply in cotton without the ruched detail or lace trim. Since I took notes on the last GBSB top I made from the same book, I cut the size up and didn’t worry too much about alterations or testing the pattern.

As it was a simple sew and I wanted to get cracking, I also constructed most of the garment and didn’t actually try it on until I needed to find the strap lengths.

At which point it clearly wasn’t going to fit at all. I’m not sure why two patterns from the same book can be so different in fit but it’s not even close, and I haven’t changed THAT much in size. So I threw the half-made thing back in the pile in annoyance and spent a few days trying to think up ways of salvaging it (mostly involving adding panels) before giving it up as a lost cause. At some point I’ll rip out all the stitching and the fabric is probably destined for some other random project.

I then sat down to read the “Sew your Size” supplement that came with Sew magazine a few weeks ago. Literally 2 pages in they recommended a pattern fitting workshop run by Clare-Louise Hardie. I looked it up and there was one such workshop running this Sunday (I was free) and it was within reasonable distance of my boyfriend’s place in North London. Fine, I thought, let’s achieve one thing in June at least, and hopefully avoid similar future cock-ups!

I would 100% recommend this and probably any other workshop run by Clare-Louise. There were just four of us during the 3-hour (+ a bit, we overran!) session which meant that as well as general principles such as measurement-taking, we all had the chance to study our own foibles and understand the likely pattern alterations we’d come across time and again. We had sample patterns to look at but we’d also all brought one of our own from home. I definitely found having a “live example” much more practical to understand what changes were being made and why.

We talked about the way the big pattern companies work in how they design their products – apparently it is quite common for them to allow for the fact that people will be in denial about their size and cut too small – so if you do actually try and cut your ready-to-wear size it will probably come up big. Add to that the fact that their measurements per size all vary and it’s really a lottery – unless you measure properly and study the information given on the pattern pack to work out what you really need.

We learnt about wear ease and design ease too – an important factor that I hadn’t previously considered at all when looking at measurements. Practising with our patterns, we all tissue-fitted a garment so that we could see any glaring issues straight away, and learnt how to fix these. In my case I had a bit of a revelation, because I have always thought that full bust alterations were inevitable to get things to fit right. Not so! Instead we added some width at the side seams, and it turns out I have broad shoulders so we also added at the centre-back, and did a sway-back alteration to improve fit. Having added at the side seams, a bit more shaping was necessary because I do have a fairly defined waist, so we pin-fitted that in order to re-draw stitching and cutting lines on the pattern.

This workshop was really such good value, I can’t overstate my recommendation. If you have been finding it frustrating getting home-sewn garments to fit, find the commercial pattern packs confusing or get easily lost in the minefield of online resources, really just get booked on to one of Clare-Louise’s workshops because there is no substitute for in person tutorial and discussion, and the group environment adds to the benefit because you can also learn from other people’s body types and alterations too!

July is going to be pretty hectic for me (I’m away 3 out of 4 weekends) so I don’t hold out much hope of a great leap forward for home sewn clothes – but my trips do include Brighton, Rome and Birmingham so I will be on the lookout for vintage or indie bargains!